Service Hotline: 0086-0564-3637655
[Why is the filtration property of non-woven fabric color masterbatch more important than its coloring ability?]
Release date:[2026/11/19] Is reading[3]次

Why is the filtration property of non-woven fabric color masterbatch more important than its coloring ability?


Stable production baseline


Non-woven fabrics mostly adopt spunbonding and meltblown processes. The melt needs to continuously pass through the filter net and the micro pores of the spinneret, making it highly sensitive to the filtering performance of the color masterbatch. The filtration property essentially reflects the dispersion effect of the pigment, representing the smoothness of the melt passing through the filter material. If the filtration property is poor, pigment agglomerates and impurities will continuously accumulate on the filter net, causing the component pressure to rise rapidly, shortening the filter net replacement cycle, frequent shutdown for cleaning, and disrupting the continuous production rhythm. Once large particles pass through the filter net, they are very likely to clog the spinneret holes, causing problems such as broken fibers, fuzz, and holes in the fabric surface, and making the entire production line unable to operate normally.


Coloring ability affects the depth of the color and is within the adjustable range. Even if the coloring ability is weak, the production end can slightly adjust the proportion of the color masterbatch to achieve the target color, without directly causing downtime. However, filtering defects are difficult to be solved by adjusting the addition amount, and it is a prerequisite for determining whether the machine can be put into production. If the filtration property is not up to standard, even the highest coloring ability cannot be stably put into spinning production.


The foundation of finished product quality


Non-woven fabric color masterbatches with good filtration properties have evenly dispersed pigments, no pigment clumps in the fibers, fewer color spots and color stripes on the fabric surface, and more uniform and stable fabric color. Agglomerated particles can also become weak points in the fiber interior, reducing the fiber's own strength, making the non-woven fabric more prone to damage during stretching and post-treatment, and affecting the mechanical properties of the finished product.


Coloring ability only represents the coloring ability of the pigment, and high coloring ability does not mean complete dispersion. Some pigments have outstanding coloring ability but poor dispersion and weak filtration performance. After being put into production, they are prone to local color spots, which can bring quality risks. Only when the filtration performance is up to standard can each fiber be uniformly colored, and the appearance and mechanical properties of the fabric surface remain consistent.


Overall, coloring ability is an optimization indicator, and filtration property is an entry criterion. When selecting suppliers and models, prioritize confirming that the filtration performance is compatible with the production line, and then conduct a comprehensive assessment combining coloring ability, color lightness, and heat resistance to balance production efficiency and finished product quality.


Keyword:
Phone:0086-181 5640 3588 Tel:0086-0564-3637655 Fax:0086-0564-3696895 E-mail:2696679920@qq.com Add:East Seventh Road, Lu 'an Economic Development Zone, Jin 'an District, Lu 'an City, Anwei Province
All rights reserved Liu An Qing Song Masterbatch Co., LTD Technical Support:中国丙纶网